Product Introduction
The SZL series biomass-fired steam boiler adopts a double-drum longitudinal layout and is fitted with a travelling-grate combustion system. The boiler consists of two major assemblies. The upper section serves as the main heating surface composed of double-drum convection tube bundles, while the lower section accommodates the combustion equipment.
Membrane waterwalls are arranged on both sides of the furnace to reduce air leakage and heat loss. The front and rear furnace waterwalls extend downwards above the grate to form water-cooled front arch and rear arch. These water-cooled arches increase the furnace heating surface area and reinforce the structural strength of the arches. A burnout chamber and convection tube bundle zone are located at the rear of the furnace. An economizer is installed at the flue-gas outlet of the boiler. Secondary air is supplied inside the furnace to intensify combustion and improve combustion efficiency.
Boiler Process Flow Diagram

Main Performance Advantages
Product Parameters
| Boiler Model | Rated Evaporation Capacity(t/h) | Rated Working Pressure(Mpa) | Rated Steam Temperature(℃) | Thermal Efficiency(%) | Maximum Transport Dimension L╳W╳H(m) |
| SZL6-1.25-SCIII | 6 | 1.25 | 194 | >83 | 6.20╳2.80╳3.65 7.20╳2.60╳2.80 |
| SZL6-1.6-SCIII | 6 | 1.60 | 204 | >83 | 6.20╳2.80╳3.65 7.20╳2.60╳2.80 |
| SZL6-2.5-SCIII | 6 | 2.50 | 225 | >83 | 6.20╳2.80╳3.65 7.20╳2.60╳2.80 |
| SZL8-1.25-SCIII | 8 | 1.25 | 194 | >83 | 7.10╳3.52╳3.65 7.80╳3.10╳2.80 |
| SZL8-1.6-SCIII | 8 | 1.60 | 204 | >83 | 7.10╳3.52╳3.65 7.80╳3.10╳2.80 |
| SZL8-2.5-SCIII | 8 | 2.50 | 225 | >83 | 7.10╳3.52╳3.65 7.80╳3.10╳2.80 |
| SZL10-1.25-SCIII | 10 | 1.25 | 194 | >83 | 7.90╳3.52╳3.65 8.40╳3.10╳2.80 |
| SZL10-1.6-SCIII | 10 | 1.60 | 204 | >83 | 7.90╳3.52╳3.65 8.40╳3.10╳2.80 |
| SZL10-2.5-SCIII | 10 | 2.50 | 225 | >83 | 7.90╳3.52╳3.65 8.40╳3.10╳2.80 |
| SZL12-1.25-SCIII | 12 | 1.25 | 194 | >86 | 8.80╳3.52╳3.65 8.40╳3.10╳2.80 |
| SZL12-1.6-SCIII | 12 | 1.60 | 204 | >86 | 8.80╳3.52╳3.65 8.40╳3.10╳2.80 |
| SZL12-2.5-SCIII | 12 | 2.50 | 225 | >86 | 8.80╳3.52╳3.65 8.40╳3.10╳2.80 |
| SZL15-1.25-SCIII | 15 | 1.25 | 194 | >86 | 9.60╳3.20╳3.65 8.30╳3.30╳3.00 |
| SZL15-1.6-SCIII | 15 | 1.60 | 204 | >86 | 9.60╳3.20╳3.65 8.30╳3.30╳3.00 |
| SZL15-2.5-SCIII | 15 | 2.50 | 225 | >86 | 9.60╳3.20╳3.65 8.30╳3.30╳3.00 |
| SZL20-1.25-SCIII | 20 | 1.25 | 194 | >86 | 10.65╳3.28╳3.60 9.30╳3.81╳2.80 |
| SZL20-1.6-SCIII | 20 | 1.60 | 204 | >86 | 10.65╳3.28╳3.60 9.30╳3.81╳2.80 |
| SZL20-2.5-SCIII | 20 | 2.50 | 225 | >86 | 10.65╳3.28╳3.60 9.30╳3.81╳2.80 |
| SZL25-1.25-SCIII | 25 | 1.25 | 194 | >86 | 11.65╳3.80╳3.60 9.30╳3.81╳3.00 |
| SZL25-1.6-SCIII | 25 | 1.60 | 204 | >86 | 11.65╳3.80╳3.60 9.30╳3.81╳3.00 |
| SZL25-2.5-SCIII | 25 | 2.50 | 225 | >86 | 11.65╳3.80╳3.60 9.30╳3.81╳3.00 |
| SZL30-1.25-SCIII | 30 | 1.25 | 194 | >86 | 10.00╳3.36╳3.60 |
| SZL30-1.6-SCIII | 30 | 1.60 | 204 | >86 | 10.00╳3.36╳3.60 |
| SZL30-2.5-SCIII | 30 | 2.50 | 225 | >86 | 10.00╳3.36╳3.60 |
| SZL35-1.25-SCIII | 35 | 1.25 | 194 | >86 | 10.00╳3.65╳3.85 |
| SZL35-1.6-SCIII | 35 | 1.60 | 204 | >86 | 10.00╳3.65╳3.85 |
| SZL35-2.5-SCIII | 35 | 2.50 | 225 | >86 | 10.00╳3.65╳3.85 |
The above data is for reference only. Please refer to the actual product and product manual for specific information. Unless otherwise specified, the right of interpretation for all data contained on this website belongs to our company.
If you require detailed information about other models, please contact us.






