The reasons mainly come from two aspects. First, fuel cost sensitivity. Natural gas price fluctuations directly affect long-term operating costs. Users no longer look only at the initial investment of the boiler, but pay more attention to the actual operating thermal efficiency — saving 10 m³ of natural gas per ton of steam means considerable savings over a year. Second, tightening emission standards. Many key regions in China have tightened NOx emission limits to 50 mg/m³ or even below 30 mg/m³, and conventional combustion technologies find it difficult to stably meet these standards. What enterprises need is not just ‘a boiler that can burn gas’, but a complete solution that balances energy efficiency, emissions, and operational reliability.
Taking the food processing industry as an example, processes such as cooking, sterilization, drying, and heating have high requirements for steam quality, and loads often fluctuate periodically. If piped gas or LNG supply is available locally, configuring a high-efficiency low-nitrogen oil/gas-fired boiler can both meet process temperature requirements and help the factory confidently pass environmental inspections. Therefore, when updating steam systems, many enterprises prioritize understanding the boiler’s measured thermal efficiency, low-nitrogen combustion technology route, and load regulation capability.
When selecting, enterprises should not only look at rated evaporation capacity, but also focus on thermal efficiency, exhaust gas temperature, raw NOx emission concentration, and load regulation ratio. In particular, the matching of the burner and furnace tube, and the control method of flue gas recirculation, directly affect the actual gas consumption and environmental performance in operation. If the boiler structural design is unreasonable, it is prone to flame-out at low load and excessive emissions at high load, adding to operation and maintenance troubles.

