Biomass boilers are environmentally friendly, with a wide variety of low-cost fuels that are easy to source. The following explains the types of biomass fuels and how the combustion system of a dedicated biomass boiler is controlled.
I. Types of biomass fuels
Biomass fuels generally consist of agricultural and forestry residues such as straw, sawdust, bagasse, and rice husk, and are distinct from fossil fuels. Biomass fuel can be stored in the boiler room for convenient and timely feeding. Under current national policies and environmental standards, direct combustion of raw biomass is classified as a high-pollution fuel, permitted only in rural household stoves and not allowed in urban areas. In practice, biomass applications mainly use densified biomass fuel (biomass pellets), which is made from agricultural and forestry waste through crushing, mixing, extrusion, and drying processes to produce a new type of clean fuel that can be burned directly. Biomass fuel has a high calorific value, generally around 3,900–4,800 kcal/kg, and after carbonization the calorific value can reach 7,000–8,000 kcal/kg. Biomass fuel is clean and hygienic, convenient to feed, reduces labor intensity, greatly improves the working environment, and lowers labor costs for enterprises.
II. Combustion system control methods for biomass boilers
Under the action of the induced draft fan, the high-temperature flue gas produced by combustion passes through convective heat exchange in the smoke tubes, enters the dust collector for purification, and is finally discharged through the chimney by the induced draft fan.

  1. Soot blowing system: The boiler is equipped with a fully automatic soot blowing device that periodically sweeps the furnace and smoke tubes to prevent ash accumulation on the tube surfaces, ensuring safe and efficient boiler operation.
  2. Flue gas and air system: The air supply system is integrated with the burner. Air is delivered by the forced draft fan through the burner into the furnace to convey fuel and support combustion.
  3. Fuel feeding system: The boiler is provided with manholes and handholes for convenient maintenance. The feeding system consists of a fuel hopper, vibratory feeder, screw feeder, and screw feed pipe. The densified fuel is transferred by belt conveyor to the hopper, and the biomass boiler then supplies the BMF fuel from the hopper to the burner via the screw feeder. To ensure continuous feeding and stable material conveying, a vibratory feeder is connected between the hopper and the screw feeder.
  4. Automatic control system: The control system uses a high-brightness, full-Chinese-display interface with a reputable PLC control system as the central control unit, and exchanges information with boiler users through a human-machine interface, enabling fully automatic operation of the BMF boiler.
  5. Combustion system: Biomass fuel first undergoes a preheating process in the burner and is then delivered into the furnace by the fan for combustion. Since the fuel has a high volatile content, when the furnace temperature reaches the volatile release temperature, the igniter can be activated under air supply conditions and the fuel ignites and burns rapidly. The burner temperature is controlled.