During the combustion of natural gas, air is needed as the combustion-supporting gas, and 80% of air is nitrogen. At normal temperatures, nitrogen and oxygen in the air are very stable gases and do not undergo chemical combination reactions. However, once the natural gas combustion temperature exceeds 1000°C, nitrogen and oxygen in the air begin to combine rapidly, generating a series of nitrogen oxides. Nitrogen oxides (NOx) are pollution sources that cause acid rain and photochemical pollution, causing strong corrosive damage to buildings and crops, and are also one of the main atmospheric pollution sources to be controlled in China. The methods to reduce NOx emissions are as follows:
Low-nitrogen combustion technology: Low-nitrogen combustion technology can effectively reduce NOx emissions from gas-fired boilers. This technology mainly reduces the nitrogen required for fuel combustion by changing the distribution of combustion air and optimizing the combustion process, thereby reducing the generation of nitrogen oxides.
Combustion control: Combustion control of gas-fired boilers is key to reducing NOx emissions. By optimizing combustion control parameters, such as combustion temperature, combustion air ratio, and intake air preheating, the fuel can be fully burned and incompletely combusted substances reduced, thereby reducing NOx emissions.
SNCR technology: Selective non-catalytic reduction (SNCR) technology is an effective method for reducing NOx emissions. This technology sprays reducing agents such as ammonia water or urea into the boiler combustion chamber, which react with nitrogen oxides at high temperatures to generate nitrogen and water vapor, thereby reducing NOx emissions.
SCR technology: Selective catalytic reduction (SCR) technology is a method that uses catalysts to catalytically reduce nitrogen oxides. This technology installs a catalyst device at the rear of the boiler, sprays urea aqueous solution into the flue gas, and reacts with nitrogen oxides on the catalyst, converting nitrogen oxides into nitrogen and water vapor, thereby reducing NOx emissions.
Fuel selection: Fuel selection also affects NOx emissions from gas-fired boilers. For some nitrogen-containing fuels, such as diesel and heavy oil, NOx emissions can be reduced by adjusting the fuel supply method and improving combustion quality.
Flue gas recirculation: Flue gas recirculation (FGR) technology recovers a portion of the flue gas and recirculates it into the combustion chamber, lowering the combustion temperature of the fuel and thereby reducing NOx emissions.